What is a Debt Ratio? Guide with Examples (2024)

One of the most crucial parameters to assess the health of a particular company is its financial position. The debt ratio, also known as the risk gearing ratio, is used to carry out the financial leverage of a company and to calculate the weight of the debt ratio and total debt and financial liabilities to total capital (equity held by the shareholder).

Let's have a look at what's in store:

  • Introduction
  • What Is the Debt Ratio?
  • The Technical Side of Debt Ratio
  • Interpretation of Debt Ratio
  • Analysis of Interpretation:
  • What is Total Debt?
  • How is the Debt Ratio Calculated?
  • Examples of debt ratio for personal and business purposes:
  • Importance and use of debt ratio formulas
  • Benefits of Calculating the Debt Ratio
  • Limitations of the Debt Ratio
  • What Are the Risks Associated with Debt Ratio?
  • What is the ideal Debt Ratio?
  • Types of Debt Ratio


In simple words, the debt ratio is calculated to measure the company’s capability to pay back its liabilities and obligations. If the debt ratio is higher, the company is receiving more money through risky loans, and if the potential debt is too high, it is at risk of bankruptcy during these periods. It is a substantial consideration for investors and lenders, as they prefer a low debt ratio as they feel that their interests are protected when the business is not performing well.

However, this debt ratio is beneficial in determining the amount of leverage the company is using, as it is a comparison of the company's total liabilities to its capital and determine. The risk of long-term debt is different from short-term debt, so investors are changing their gear to focus entirely on long-term debt.

What Is the Debt Ratio?

One must always spend according to what he has and borrow according to what he can repay. It is a basic life rule which should be thoroughly applied in businesses and organizations. The debt ratio is a simple financial indicator that represents a debt to capital.

The Technical Side of Debt Ratio

The formula for the debt ratio is dividing the total debt of the company by the total assets/stocks/equity held by the company/shareholders.

Debt ratio = Total Liabilities / Total Asset or Shareholder’s Equity
  • ‘Total Liabilities’ considers all the debt that the company bears
  • The Shareholder’s Equity (SE) is the net worth of a company
Net Assets= Assets – Liabilities
  • SE is the owners` claim over the company`s value after deducting all the debts and liabilities that they owe

As a shareholder, you become a part-owner of the company and your ownership depends on the percentage of shares you own in proportion to the total number of shares that a company has issued.

More preference is given to the company`s creditors, lenders, and debenture holders than the equity shareholders at the time of disbursem*nt.

Investing in stocks is a simple calculation wherein stockholders are paid off before the owners are paid back from the company`s assets. SE is the capital's ability to cover a company's liabilities. It can be negative or positive depending on the business activities of the company. This is an important indicator of a company's financial condition and makes the debt ratio an important representation of a company's financial condition.

Interpretation of Debt Ratio

This debt ratio is useful for analyzing a company's financing strategy. This indicator helps you know whether a company is using stocks or liabilities to do business.

  1. High debt ratio: A high debt ratio indicates a high risk. This means that the company is borrowing more money to raise business funds due to the lack of funds in the company. In other words, it means that it is involved in debt lending because its finances are in the red
  2. Low debt ratio: This means that the company is overcapitalized and does not need to borrow to fund the business or business. A company has more capital than debt, which speaks to the company

Interpretation: As we correctly stated, high-level leverage means that the company is in the red and borrows more than its own money, and low-level leverage means that the company uses more of its assets. And it shows that there is little borrowing.

Now, by definition, we can conclude that high leverage is bad for businesses and is negatively evaluated by analysts.

Analysis of Interpretation

Looking at the debt ratio again, the debt ratio is calculated by dividing the total debt by capital. Depending on the type of industry, a high-level DE may be common in some, while a low-level debt ratio may be common in others.

Capital-intensive industries such as manufacturing can have a high debt ratio, while services and technology-focused industries have relatively low capital and growth needs, which can lead to a low debt ratio. This shows that a company's debt ratio needs to be treated with caution compared to other industries.

What is Total Debt?

A company's total debt is the sum of current debt, long-term debt, and other fixed payment obligations that the company incurs during its normal operating cycle. Creating a debt plan helps you classify your debt according to specific parts. Not all short-term and long-term debt is considered debt. Let us understand what represent debt and what doesn’t:

Considered debt:

  • Drawn line-of-credit
  • Current portion of Long-Term Debt
  • Capital lease obligations
  • Notes payable with maturity within a year
  • Notes payable with maturity more than a year
  • Long-Term Debt
  • Bonds payable

Not considered debt:

  • Accounts payable
  • Deferred revenues
  • Accrued expenses
  • Dividends payable

How is the Debt Ratio Calculated?

The debt ratio is formulated by dividing a company’s total liabilities by the total assets/shareholder’s equity. The formula is like this:

Debt ratio = Total Liabilities/Total Assets or Shareholder’s Equity

The total liabilities include short-term and long-term debts, along with fixed payments obligations.

Calculating a company's debt ratio is imperative to analyze if a company is exposed to financial risk. The general method of calculating debt ratio:

Determine the total debt

Your company's total debt is the sum of that debt and other financial obligations. It is a combination of short-term debt and long-term debt. Examples of total debt are wages, credit card debt, utilities, or invoices to be paid. Most often, it's the money your company is borrowing at any given time.

Determine your total assets in the business sense

"Total assets" refers to the total number of assets in a company. Assets retain their value, but can also be depreciated over time. Examples of total assets include commodities, inventories, and accounts receivable. They are units owned by your company.

Calculate the debt ratio

Once you have identified both your total liabilities and your total assets, you are ready to calculate your debt ratio. To calculate the debt ratio, divide the total liabilities by the total assets.

It is important to note that the low or high debt ratio depends on the particular industry.

However, a debt ratio greater than 1 indicates high future financial risk, and a low debt ratio (usually around 0.5) means that the business has a good financial base and can be protracted.

Examples of debt ratio for personal and business purposes

Example 1

Mr. Rajesh has a bakery with total assets of 50,000$ and liabilities of 20,000$, the debt ratio is 40%, or 0.40. This debt ratio is calculated by dividing 20,000$ (total liabilities) by 50,000$ (total assets). If the debt ratio is 0.4, the company is in good shape and may be able to repay the accumulated debt.

Example 2

Mr. Narayan has a furniture business and has taken a business loan of 100,000$ and retained earnings of 25,000$, its debt ratio will be 4. This is because 100,000$ (total debt) divided by 25,000$ (total capital) is 4 (debt ratio) which is a high-risk debt ratio and a dangerous investment.

Example 3

Let`s say Mr. Max is running a clothing store and pays its employees 50,000$ and has total assets amounting to 100,000$. To calculate the debt ratio, divide 50,000$ (liabilities) by 100,000$ (assets). This means the store has a debt ratio of 0.5 which is generally considered favorable.

Example 4

Let's say you recently ventured into a startup company and have borrowed funds from a bank as a personal loan. The bank has determined that your business has total assets of 50,000$ and total liabilities of 5,000$. Divide 5,000$ by 50,000$ to calculate the debt ratio. This results in a debt ratio of 0.1. This is a very cheap and low-risk debt ratio. In these situations, your bank should be fine in lending you a loan to initiate your business.

Example 5

You are planning to take a holiday with your family. Let's say you have 600,000$ in total assets and 150,000$ in liabilities. To calculate the debt ratio, divide the liability (150,000$ ) by the total assets (600,000$ ). This results in a debt ratio of 0.25 or 25 percent. Since this is less than 1, this is considered a low-risk debt ratio and you may go for that much longed-holiday or even seek financial assistance from a bank to pay for your vacation.

Importance and use of debt ratio formulas

This debt ratio formula is used for the following purposes.

1. Top Management:

The first group to use this debt ratio is the top management of the company, which is directly responsible for the development or reduction of the company. Based on this indicator, top management recognizes whether the company has sufficient resources to meet its obligations.

2. Investors:

The second group that is interested in finding out the debt ratio of a company is investors, who want to confirm the position of the company before investing money in it. For this reason, investors need to know if a company has sufficient assets to cover the costs of its liabilities and other obligations. This indicator also measures the financial leverage of a company. It also tells investors the leverage of the company. If a company has a higher level of liability compared to its assets, it has higher financial leverage and vice versa.

3. To Estimate the Financial Leverage:

The debt ratio is an important way to identify the financial stability and health of a business. If a company's debt ratio exceeds 0.50, the company is called a leveraged company. This shows that the company has more leverage in its capital structure. Companies with low debt ratios are said to be conservative. Companies with a debt ratio of less than 0.50 are stable and have the potential for longevity.

4. For Financing:

Companies can raise additional funding from outside for expansion. Benchmark debt ratios can vary from industry to industry, but a company's .50 debt ratio can be a reasonable one to obtain extra financing for the smooth running of the company.

If a company's debt ratio is 1, it means that the company's total debt is equal to its total assets. Or you could say that if a company wants to repay its debt, it has to sell all its assets. If a company has to pay its debt, it has to sell all its assets, in which case the company can no longer operate.

Benefits of Calculating the Debt Ratio

  1. A low debt ratio means that a company can meet its debt through cash flow and use it to increase return on equity and strategic growth
  2. Since the cost of debt is lower than the cost of capital, raising the leverage to some extent can lower the weighted average cost of capital (WACC) of the company
  3. The more debt you use, the better your company's return on equity (ROE). However, if you use liabilities instead of equity, the amount of equity will be lower and the return on equity will be higher

Limitations of the Debt Ratio

  1. The debt ratio of 1 is considered to be the same which means Total liabilities = capital. This allocation is industry-specific and depends on your current and fixed asset share. Capital-intensive companies are said to have a higher debt ratio than service companies
  2. The maximum permissible debt ratio for more companies is 1.5 - 2 or less. Large companies with a debt ratio score greater than 2 are acceptable
  3. The debt ratio indicates that a company may not be able to generate enough cash to meet its debt. However, a low-leverage company means that the company is taking advantage of the high profits that financial leverage can bring

What Are the Risks Associated with Debt Ratio?

High levels of debt carry two major risks.

  1. If the company has a high debt ratio, the losses incurred will be worse and the company will have difficulty paying off the debt
  2. If the level of debt is too high, the cost of debt and the cost of capital will suddenly rise. In addition, WACC's weighted average cost of capital will become too high and stock prices will fall

What is the ideal Debt Ratio?

The simple answer to this is that the debt ratio quota should ideally not exceed 2. A debt ratio of 2 means that the company has 1 unit of capital for every 2 units of debt. This is very high and indicates a high risk. Ideally, there is no such thing as an ideal debt ratio.

Yes, the debt ratio greater than 2 is very high, but in some industries such as manufacturing and mining, the normal debt ratio can be 2 or more.

In other industries, debt ratio 2 may not be normal. What we need to see is the industry average. From this, we can infer you should be vigilant while comparing debt ratios and that the same should be done for companies in the same industry and industry benchmarks.

Types of Debt Ratio

  1. Debt-to-assets ratio: To calculate the debt ratio, divide the total liabilities by the total assets. The greater the debt ratio of a company, the greater its financial leverage
  2. Debt-to-equity ratio: To calculate this ratio, you must divide the company's total liabilities by the shareholder’s equity
  3. debt-to-capital ratio: To calculate the leverage of a company, divide the total liabilities by the sum of its debt and total equity
  4. Debt-to-EBITDA ratio: This debt ratio is calculated by dividing the company's total liabilities by its sum of earnings before depreciation, taxes, interest, and amortization

How can Deskera Help You?

An online accounting and invoicing application, Deskera Books is designed to make your life easier. This all-in-one solution allows you to track invoices, expenses, and view all your financial documents from one central location.

What is a Debt Ratio? Guide with Examples (1)

The platform works exceptionally well for small businesses that are just getting started and have to figure out many things. As a result of this software, they are able to remain on top of their client's requirements by monitoring a timely delivery.

What is a Debt Ratio? Guide with Examples (2)

Thanks to our well-designed and well-thought-out templates, you can now anticipate that your work will become simpler. A template can be used for multiple actions, including invoices, quotes, purchase orders, back orders, bills, and payment receipts.

Take a small tour of the demo here to get more clarity:

Lastly, you would be able to assess all the reports- be it income statement, profit and loss statement, cash flow statement, balance sheet, trial balance, or any other relevant report from your laptop and your mobile phone.

Deskera Books hence is the perfect solution for all your accounting needs, and therefore a perfect assistant to you and your bookkeeping and accounting duties and responsibilities.

Try Deskera Books Today

The perfect assistant bookkeeping duties and responsibilities

Click here for free trial


The concept of debt ratio is essential. You can use the equity and debt aspects to depict the financial position of a company. The debt ratio checks whether a company is dependent on liabilities or equity for running its business. This debt ratio is crucial for all stakeholders and holds relevance in finding out the current debt/asset situation of an organization.

Key Takeaways

  • The debt ratio is a simple calculation of a company’s total debt to total assets
  • Capital-intensive companies typically have a much higher debt ratio than other companies, as this ratio varies widely from industry to industry
  • A company's debt ratio can be calculated by dividing total liabilities by total assets. A debt ratio of more than 1.0 or 100% means that the company has more liabilities than assets, and a debt ratio of less than 1.0 or 100% means that the company has more assets than liabilities

Related Articles

Financial Ratios - All you Need to KnowAfter striving for months to generate revenue as a company, how do you ascertainyour financial performance? Or when you want to invest in a company, how do youknow whether it is a profitable buy or not? Most importantly, how do you analyzewhere your firm stands financially in the competitive mark…Deskera BlogRhema Hans
What are Accounting Ratios?Accounting: the one word a majority of the people seem to be scared of. Numbercrunching isn’t everyone’s cup of tea, right? However, once you understand thepurpose of it, accounting starts to make more sense than anything else. It makes total sense too. Every business setup needs to operate with…Deskera BlogDeskera Content Team
What is Liquidity Ratio? Guide with ExamplesLiquidity ratios are fundamental in forecasting the future cash flows of thefirm. They are widely used for this purpose and for deciding about financingmix, capital structure, investment, etc. These liquidity ratios are used to measure a company’s ability to pay itsshort-term obligations. Liquid…Deskera BlogDeskera Content Team
What is Profitability Ratio? Types, Examples, and Why they Matter?Are profits always on your mind?Want to track the KPIs that matter?What can you add to your already existing KPI List to measure the success ofyour business? You are about to learn 8 Profitability Ratios that will help boost yourbusiness. In this post, we aim to highlight the significance of t…Deskera BlogDeskera Content Team
What Is Operating Cash Flow Ratio? Guide with ExamplesAre you looking for a way to measure your company’s cash flow, debt, orliquidity ratio? Are impending product launches, major expenses, or expansion plans not lettingyou sleep at night? Then you must get an idea of the company’s operating cash flow ratio to have aclear picture of its earnings.…Deskera BlogDeskera Content Team


What is a Debt Ratio? Guide with Examples (2024)


What is a Debt Ratio? Guide with Examples? ›

Let's say you have 600,000$ in total assets and 150,000$ in liabilities. To calculate the debt ratio, divide the liability (150,000$ ) by the total assets (600,000$ ). This results in a debt ratio of 0.25 or 25 percent.

What is an example of debt ratio? ›

So if a company has total assets of $100 million and total debt of $30 million, its debt ratio is 0.3 or 30%.

What is an example of calculating debt-to-income ratio? ›

To calculate your DTI, you add up all your monthly debt payments and divide them by your gross monthly income. Your gross monthly income is generally the amount of money you have earned before your taxes and other deductions are taken out.

What does a debt ratio of 0.5 mean? ›

Debt Ratio = 0.50, or 50%

A company that has a debt ratio at this level has a perfect balance in its debt and equity funding and would also be considered a low risk for a potential financing source.

What does a debt ratio of 0.4 mean? ›

The calculation considers all of the company's debt, not just loans and bonds payable, and all assets, including intangibles. If a company has a total debt-to-total assets ratio of 0.4, 40% of its assets are financed by creditors, and 60% are financed by owners' (shareholders') equity.

What is a healthy debt ratio? ›

If your debt ratio does not exceed 30%, the banks will find it excellent. Your ratio shows that if you manage your daily expenses well, you should be able to pay off your debts without worry or penalty. A debt ratio between 30% and 36% is also considered good.

What is an example of a bad debt ratio? ›

The bad debt to sales ratio represents the fraction of uncollectible accounts receivables in a year compared to total sales. For example, if a company's revenue is $100,000 and it's unable to collect $3,000, the bad debt to sales ratio is (3,000/100,000=0.03).

What is debt-to-income ratio for dummies? ›

Add up your monthly debt payments (rent/mortgage payments, student loans, auto loans and your monthly minimum credit card payments). Find your gross monthly income (your monthly income before taxes). Debt-to-income ratio = your monthly debt payments divided by your gross monthly income.

What is debt ratio calculator? ›

A debt-to-income, or DTI, ratio is derived by dividing your monthly debt payments by your monthly gross income. The ratio is expressed as a percentage, and lenders use it to determine how well you manage monthly debts -- and if you can afford to repay a loan.

How do you set debt-to-income ratio? ›

To calculate your debt-to-income ratio:
  1. Add up your monthly bills which may include: Monthly rent or house payment. ...
  2. Divide the total by your gross monthly income, which is your income before taxes.
  3. The result is your DTI, which will be in the form of a percentage. The lower the DTI, the less risky you are to lenders.

Is 0.2 a good debt ratio? ›

Low debt ratio: If the result is a small number (like 0.2 or 20%), it means the company doesn't owe a lot compared to what it owns. This is usually a good sign. A lower debt ratio indicates a healthier financial position.

Is 0.8 a good debt ratio? ›

From a pure risk perspective, debt ratios of 0.4 or lower are considered better, while a debt ratio of 0.6 or higher makes it more difficult to borrow money. While a low debt ratio suggests greater creditworthiness, there is also risk associated with a company carrying too little debt.

What does a debt ratio of 1.0 mean? ›

A ratio of 1.0 indicates that average income would just cover current interest and principal payments on long-term debt. Cash Flow to Total Debt (ratio of total income plus depreciation and amortization to total current liabilities plus total long-term debt)

What is a 0.75 debt ratio? ›

That means the debt ratio is 0.75, which is highly risky. It indicates for every four assets; there are three liabilities. The startup is highly leveraged, and there is a minimal chance that the bank would award the business the loan based solely on this information.

What does 0.35 debt ratio mean? ›

Debt to Asset Ratio = (300+70) / 1046 = 0.35

A ratio of 0.35 means that Company ABC's debt funds 35% of the company's assets.

What does a debt ratio of 0.6 indicate? ›

If the ratio is below 1, the company has more assets than debt. Broadly speaking, ratios of 60% (0.6) or more are considered high, while ratios of 40% (0.4) or less are considered low. However, what constitutes a “good debt ratio” can vary depending on industry norms, business objectives, and economic conditions.

What is an example of a debt to worth ratio? ›

So if you owe a total of $85,000 and your assets are worth $155,000, your debt-to-net worth ratio will be 85,000 / 155,000, or 55%.

What is an example of debt to credit ratio? ›

For example, say you have two credit cards with a combined credit limit of $10,000. If you owe $4,000 on one card and $1,000 on the other for a combined total of $5,000, your debt-to-credit ratio is 50 percent.

What are the examples of debt equity ratio? ›

Debt to Equity Ratio in Practice

If, as per the balance sheet, the total debt of a business is worth $50 million and the total equity is worth $120 million, then debt-to-equity is 0.42. This means that for every dollar in equity, the firm has 42 cents in leverage.

What is an example of a debt yield ratio? ›

⁠Debt Yield Ratio = Net Operating Income ÷ Total Loan Amount

For example, if a commercial property's net operating income is $600,000 and the entire loan amount was $2.5 million, the debt yield would be calculated by dividing $600,000 by $2.5 million, giving you a resulting yield of 24%.

Top Articles
Latest Posts
Article information

Author: Patricia Veum II

Last Updated:

Views: 5433

Rating: 4.3 / 5 (64 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Patricia Veum II

Birthday: 1994-12-16

Address: 2064 Little Summit, Goldieton, MS 97651-0862

Phone: +6873952696715

Job: Principal Officer

Hobby: Rafting, Cabaret, Candle making, Jigsaw puzzles, Inline skating, Magic, Graffiti

Introduction: My name is Patricia Veum II, I am a vast, combative, smiling, famous, inexpensive, zealous, sparkling person who loves writing and wants to share my knowledge and understanding with you.